...completely unplugging the range (or shutting off the breaker) for 5 minutes. If the error code returns after plugging the range back in, then the control board for the range will need to be
Question about Frigidaire Ovens
...error in the clock control board of the range. You can unplug/turn off breaker to the range for 1 minute and then plug/switch it back on. This too may possibly fix the DR.. maybe?! Exact same thing ...
...error identification, which could be an issue within your control board. "F1" typically can indicate that the range has detected an issue with the runaway temperature (overheating). Both codes could ...
error f13 on my frigidaire oven how do i fix it The "F13" error code means "Bad EEPROM identification/Checksum error". If reseting the power did not help then according to Frigidaire suggested ...
...range/ovens Kenmore Elite Model 790.99129409. Receiving error code F-13 when Broil mode is selected. While this code is showing, no other oven selections (Bake) are available. When power is shut down ...
...Error Code for Whirlpool, Try unplugging oven for a few minutes and then plug or switch power back on from breaker and it should reset. Also send the exact model number located inside your bottom ...
range and remove the screws that mount this sensor to the back wall of the oven. Carefully pull the wire harness into the oven cavity until you get to the wire harness disconnect plug. You should have
1,337 questions posted
Usually answered in minutes!
123 Questions
119 Questions
44 Questions
