KitchenAid Artisan Series Tilt-Head Stand Mixer "stir speed kitchenaide" Questions

...stir speed. Hi everyone, I have a US 110v Artisan mixer with a quality inverter, the stir speed is running at twice the normal speed so useless for dough, I've changed the governor and speed board to ...

...Stir & 2nd at High speed. The motor can not run for the rest of speed. Hi. Goto kitchenaid.com and download the parts catalog for your mixer model, these drawings will assist you in the disassembly ...

Stir" speed, starts at speed 2 then if I am very careful I can nudge it down to stir speed without it stopping, but if I just move lever normally to that position it shuts off. I had the same problem.

I have a 350 watt kitchenaid stand mixer, the stir speed doesnt work, all other speeds seem ok. thx bob replace the stir speed switch

stir speed" delineated. What is the equivalent of stir speed on the older models? -- 1 or 2? On models with the "STIR" speed, the RPM (Rounds Per Minute) is 60. Set your mixer speed to "1" or "2"

speed STIR and so on and so forth. Can never achieve highest speed 10. Is this something I can adjust on my own? Ideally you need to fix what's bent and that normally would involve splitting the cases

...Stir speed is the same as setting 2, but all others (4, 6, 8, 10) work fine. Tried adjusting the control board but "stir" and "2" still spin the same. You are not adjusting the ...

...stir" mode. It is stirring too fast. Is there a way to slow it down? Sounds as if there is a fault with the motor speed control. A Service Manual covering your model can be downloaded at: ...

...Speed 1/Stir speed. I've tried adjusting the speed plate and it won't slow down. Is it the fault of the governor,speed plate or phase control... Hope you could help and your time spent is much ...

stir speed all other speeds seem ok The stir speed doesnt work all others seem ok. I don't know if it will work for you but move the speed lever from front to back a few times as fast as you can. This