f3 and f2 codes on Tappan stove model 30-3991-00-03 1. Test harness/connections P4 (EOC) and P11 (Surface Element Control Board). 2. If harness checks correct, failure can be caused by ...
...P4 connector on the power board. 2. Ensure door latch switches are operating properly. 3. Check that neither latch switch nor common wires are pinched to the appliance chassis. 4. If F45 persists, ...
...a "Communication failure between EOC and ESEC system. Recommended action: Test harness/connections P4 (EOC) & P11 (Surface Element Control Board). If harness checks OK, failure can be caused by ...
connector P4 I think). That's probably blown, and can be replaced. Additionally, you may have to replace the over-temp fuse on the oven that was being cleaned (at least that's what's happening to me).
states that the most likely cause is a bad Electronic Oven Control (EOC). Try checking the wire harness and the P4 connector at the EOC. If the wire harness and the connector are fine, replace the EOC
105 questions posted
Usually answered in minutes!
353 Questions
213 Questions
158 Questions
123 Questions
110 Questions