Saeco Odea Giro Espresso Maker - Black/Silver "coffee group" Questions

Cannot reinstall the brew group after cleaning. If you can remove the brew group easily, it should go back in easily. Make sure the brew group is in neutral position(2 arrows pointed to each other) ...

...coffee grounds drawer light were blinking alternatively. I did as the instructions said and turned the machine off then back on to no avail. So I removed the grounds drawer and brew group and cleaned ...

Coffee grinds but nothing comes out of dispensing head. Brew group wont come out. The machine grinds but nothing comes out of dispensing head, machine also sounds a lot quieter at this stage. Brew ...

...coffee exits the group (water flows in from underneath). The other possibility is the set of gaskets on the white nozzle behind the brew group. You can buy replacements for those. If the machine is ...

insert coffee brew group insert after cleaning brew group odea go

...coffee compacting in the brew group and/or a dirty brew group that gets stuck and does not cycle properly. First, you're going to need to get the brew group out. Check this out to get the brew group ...

...coffee, water and it is clean I had this problem once, i think it was the magnetic sensor for the door to the brew group. Make sure it is clean inside and properly closed. Hope it helps. In my case, ...

group is automatically placed in the correct position. 2-Coffee grounds drawer is inserted. Remove the dregdrawer first, then the brew group. google "Odea technical service manual ". look at section 5

...group the same way that you usually do after you take it out ie. make sure that the coffee grind collector is sitting vertically, and is depressed down. You may need to jiggle and move the pieces ...

group nor can I replace the coffee grounds drawer. It appears that a mechanism is out of place in the upper left corner of the brew group that blocks the tall part of the grounds drawer to go back in.