...no avail.I have to turn it on with manual cool button behind the front panel.I does not turn on or off with the remote Regards Daniel Clifford Indoor room sensor and coil sensor defective. Replace
...to unit. Again plug power on unit and start with remote and try to cancel the timer on and off. Press set. And also cool setting must be minimum 3 degree less than room temperature. Helpful
...If not transmission problem between remote and PCB. Replace batteries and check once again. If beep sound comes and no start, check compressor is working and also with proper gas pressure.
...start to look? Hi, if the unit has a remote control,check the batteries and replace if required. Unplug unit from wall socket and check the filter in the unit where the cold air comes out, the cover ...
...cools ok - I would just keep an eye on it for a few days - watching to see if it does again. A breaker that "keeps" tripping for no apparant reason is an indicator of something electrically wrong ...
start. Can't tell if compressor is running or not. doesn't sound like it is kicking in. if unit is more than 5 yrs old dump it!!! most frigidaire models just dont last...that is why they are so cheap.
Question about Kenmore Heating & Cooling
SPT WA-1220H Portable Air Conditioner stopped blowing COOL air? Unit was blowing cold air great until 2 days ago. Now, when on COOL mode, fan blows ambient air for couple of minutes, then COMP solid ...
start, check to see if the fuse or protector trip is blown. Also inspect the batteries in the remote controller and the electrical plug on the unit for proper connection. If the unit is not cooling or
...start when the overload resets, the overload will again cut the electricity to the compressor. This cycle will continue indefinitely. (Always allow three to five minutes before restarting the ...
28 questions posted
Usually answered in minutes!
90 Questions
61 Questions
42 Questions
37 Questions
47 Questions