Bosch Nexxt 500 Plus WFMC5301UC "spider arm repair" Questions

...spider arm broken, it may able to wash, but in spin cycle, it makes loud noise and unbalance movement. replace the spider arm. if you are handy, you can use few strong enough pieces of steel iron to ...

...spider is the support arms that hold the wash tub to the drive shaft. It's very expensive to repair. If there is no thumping sound when you turn the drum, it could be that one of the supports or ...

...spider as one unit. The cost to repair would be in the hundereds. See the following link to judge for yourself if you want to fix it yourself or have it fixed. ...

back and forward) it confirms "spider" arm damage. Very expensive to repair - labour intensive and replacement parts not cheap. This is usually a "terminal" problem. Sorry to be the bearer of bad news

spider arm supports in your washer has failed. The spider arms hold the stainless steel wash drum to the axle. You need to stop using the machine immediately since the wash drum is flopping around the

...and ran a short spin and water appears to be coming from where the spider arm attaches to the drum. Likely problem? Worth getting repaired? Thanks. Probably not. Sounds like bearings and seal is

...are shot, you will need to replace the rear outer drum ***'y and possibly the shaft/spider; (if the shaft is rusted to the inner bearing races). in any case; it's not a cheap and easy

repair since you need to buy a replacement wash drum and spider arm assembly which almost cost as much as new washer. Get a few estimates before deciding whether to repair or replace the washer. Sorry

...spider") To repair, remove bolt on end of shaft at center of motor. You may have to cut it with an angle grinder, but don't worry about that, because the shaft has to be replaced anyway. Remove motor ...

...spider arm on my washing machine and while taking it apart noticed a small crack in the lower counter weight. Could this be causing intermittent problems. It sometimes spins and sometimes doesn't at ...