Question about Sewing Machines
...stitch selection buttonhole function? You don't have to use the buttonhole attachment. Many older machines never had the buttonhole attachment but still made buttonholes. There are manual ways to sew ...
...buttonhole. Sometimes they will stitch both long sides in the same direction too, so sequence is near bar tack, down right hand side, far bartack, then it will stitch back to front in little straight ...
...buttonhole is completed and therefore it will stitch in the same spot. Also, try adjusting the stitch length. I've found that I can't make buttonholes while on the satin stich setting ( that little ...
buttonhole stitch problem buttonhole stitch does a perfect buttonhole on sample but the actual buttonhole on the garment does half fine but after it turns to do the other half it wads up thread ...
Question about Singer Sewing Machines
...buttonhole and stitch length You are stuck in buttonhole. The selector knob does not spin round and around. It is moved from Stitch 1 to stitch 14 and back. Try selecting buttonhole and then running ...
...stitch width, to the blue buttonhole symbol. Now turn right knob stitch length to blue 1, sew down the first side of your buttonhole until foot slide in the buttonhole foot reaches end stop. raise ...
buttonhole marked in blue (stitch selection, width and length). Mark length of buttonhol on the material. Place work under foot with the mark in the middile fo the foot, the start being directly below
...buttonhole pattern and zig zag stitch down to the bottom mark. Do not pull the fabric or you will stretch the stitch. Make sure your last stitch is on the left hand side. 8. Change the needle pattern ...
Question about Kenmore Sewing Machines
...buttonhole as you reach them. The stitch length dial has to be set to an appropriate length in the block for buttonholes. The top and bottom tack bars use the same stitch selector. There are separate ...
...buttonhole stitch? when in doubt read your manual . search for one thru Google make,model,manual Difficult to assist without more machine information. FWIW, a lot of older machines do not have a ...
32 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions