Brother CS6000i Computerized Sewing Machine "needle threader" Questions

Needle threader won't work on my Singer 4423 Hi there, The needle threader hook is very tiny and easily bent or damaged. The needle threader is designed not to turn, if the needle is not at its most ...

...needle threader for a plus 1 viking sewing machine If it's the viking needle threader that was made for this machine, you would mount the needle threader over the needle screw. The part that fits ...

...needle threader on my Janome 6260 quit working. The needle is inserted correctly. Is the threader broken or just not meeting the needle eye? If broken, it can most likely be repaired. If the threader ...

...needle threader? first if so, pull it down and put the thread behind the left side of the threader and loop the thread around toward the needle then go behind the finger of the threader hold the ...

...needle threader It does not line up with the needle hole. The needle hole is below the automatic needle threader. Usually, the needle needs to be raised so the needle eye will match the threader. ...

...needle threader seems not working, I can't make the thread go in the needle. Can you help me. Thanks. If your needle is too small, the threader cannot fit through the eye. It's usually recommended to ...

...needle threader it is a instrument that has a very fine piece of wire in a loop that you push through the eye of the needle , put the thread in that loop and pull the loop back out of the eye and the ...

...needle threader? Mine won't work on very small needle sizes so I resort to the old manual needle threader for these. Ditto for twin needles. Otherwise its a case of pulling the auto threader down so ...

Needle threader not working Move the needle to the top. Loosen the screw on the threader. Use the threader as if you are using it. You will have to adjust it to the side and up or down. Move it so the

...needle threader is not lining up with the needle. how do I lower the needle threader? You don't need to adjust the needle threader. You need to adjust the height of the needle so it meets the needle ...