...tub - Over time, the steel or plastic outer tubs can rust, split, or be punctured. If this happens, you may have to replace the entire outer tub--but that may not be an economical repair to make. ...
...plastic silicon tub specifically to mend the crack. I suggest that you find out why there is a crack. The common reason would be vibration, or during installation the pressure in mounting the booster ...
...tub - Over time, the steel or plastic outer tubs can rust, split, or be punctured. If this happens, you may have to replace the entire outer tub--but that may not be an economical repair to make. ...
Question about Electrolux Dishwashers
...plastic tub. Is there a way to repair them? Can watch the water drip from underneath using a mirror, but don't see any holes from underneath. However, when opened the door and looked around ...
...plastic tub, check the inside thoroughly for cracks, my 10+ year old whirlpool Quiet Partner IV developed a small crack on the right side just under the heating element due to deterioration. I used ...
crack, but i'm afraid there's something else leaking in there. This washer is only 4 years old - I'm totally disgusted. The plastic bottom is not removable/replaceable. if you are very careful you can
tub. There's a plastic fitting that seems to be glued to the side of the tub and the hose from the inlet valve goes to the top of this fitting. There are no visible cracks or other damage but there is
plastic and the arm cracked. It was very cheap, easy and inexpensive to replace (found it online for less than $20). If the little arm is cracked, it will assume the tub is full of water and will
...crack. Thanks for any suggestions. Hello. Anything is worth trying! But I would recommend epoxy. It works alot better with plastic and rubber items. Most of the leaks I have found in Kenmore machines ...
323 questions posted
Usually answered in minutes!
438 Questions
192 Questions
187 Questions
117 Questions
100 Questions