Toshiba Satellite A215-S7422 Notebook "battery wont hold charge" Questions

...doesn't hold a charge with or without the battery Laptop wont turn on and doesn't hold a charge with or without the battery problem with the battery, try another battery. this will fix

Wont Charge it may be discharging; but most likely; a non-charging laptop usually has a dead batterytry this; take out your visible battery; plug into wallthen unplug chord; then hold power button for

Battery Fault, Wont hold charge, Second battery the same Hi The problem you are experiencing on your pc notebook may not be the battery but the charging port. All you need to do is to remove your ...

...battery and got new a/c addaptor not charge my problem is that my computer wont plug into my computer. used to charge started to get looser and looser and not wont charge at all. the place where u ...

...wont turn on - battery charge light blinking yellow regardless if charger is in or not. Either the power supply is not working or the battery has failed and will not hold a charge. If the laptop is 3 ...

battery wont charge Unfortunately with a computer that old, the battery will stop working correctly and will no longer hold a charge. The only way to fix this issue is to buy a new battery. You can ...

...wont charge plug light is blinking Power darin the computer 1. remove the battery 2. remove the AC Adapter 3. press and hold the power button for 1 minute 4. once done plugged back in the battery and ...

...battery wont hold charge i have a m45s269 laptop Sorry but the battery has gone bad. Mine is same way but I use power plug so I don't worry about it. The only thing you can do is check with the ...

...Wont power on Toshiba A205-S5809 Computer Laptop will not power on. I tried unplugging the power chord and hold down the power button for 15 seconds. This did not work I also tried removing the ...

wont hold charge I will suspect the battery first. I make sure the battery I reseat the battery, make sure the charger is well plugged in and no damage to the cable. The next step is that I would test