Question about Hifonics Car Audio & Video
dual 4 ohm subs wired in Parallel, a single dual 2 ohm subwoofer wired in parallel, a single dual .5 ohm wired in series. Or something similar. http://www.bcae1.com/spkrmlti.htm two dual 2 ohm subs =
...ohms DVCs in series, 2 subs in parallel = 4 ohms DVCs in parallel, 1 sub = 2 ohmsWith two, dual 4 ohm subs, you can only have 1 ohm or 4 ohm total impedance. I HAVE 4 DUAL 4 OHMS AND I WANT TO DO 1 ...
Question about Orion Car Audio & Video
...dual subs orion hcca 250 digital reference & orion XTR 12" 500w dual voice coil subs... what is the best connection should i do to attain the best bass i can get with this system without burning my ...
Question about Verge Car Audio & Video
subs that are dual 4 ohm and wire both of them + to + and - to - and go bridge the amp which would be both wires from sub both + together and both - wired bridge on the amp will make it a 1 ohm to the
Question about Alpine Car Audio & Video
...in infinity sub my amp is not pushing my sub, I have almost no bass coming from sub If you have a dual voice coil sub, make sure that you have the positive and negative terminals connected
...rumble amp is in protect mode. check your wiring and make sure your sub is wired properly for ohms. dual 4 ohm in parallel = 2ohm. dual 4 in series is 8 ohms. dual 2 ohm parallel= 0.5 ohms and in ...
Question about Kicker Car Audio & Video
...dual 2 ohm subs for this amp... I have the same setup but with dual 2 ohm subs and it is rediculous... you need to buy different subs that are dual 2 ohm or buy an amp that is stable at 1 ohm... you ...
...next sub; then negative on sub to negative on amp) Note though, with two dual voice coil subs, you can have a 1 ohm load with the first set up, which can damage your amp. Let me know if this helps
..."-"), and bridge the two channels of the amp (aka put them in parallel). But this, also, would be about 200W on each sub. Things get different if the subs have dual 2 ohm, 3 ohm, or 8 ohm voice
Question about Dual Car Audio & Video
...dual subs and a 340 watt amp. Usually only one of my subs works but occasionally they will both work. How do i get them both to work all the time? make sure the cables are tigth on the terminals of ...
10 questions posted
Usually answered in minutes!
55 Questions
42 Questions
24 Questions
26 Questions