MTX Thunder 3401 Car Audio Amplifier "directions connect speaker wires rca" Questions

Ad

...connect the speaker lines directly to the RCA inputs of your amplifier. But you can connect them to your amplifier if your amp has a high level input. Most of the time it looks just like the speaker ...

Ad

Question about Infinity Car Audio & Video

3 Answers

...connect my Amp to my existing BMW head unit - I have been told by some that I can take the feed straight from the Factory Head Unit - (which has no RCA pre-outs) using a speaker wire to RCA connector ...

Ad

Question about Blaupunkt Car Audio & Video

2 Answers

...you run the speaker wires directly to the amplifier. If not you would have to get a line level converter also known as a high low 2 convert speaker wires to RCA at that point you connect an RCA

Question about Rockford Fosgate Car Audio & Video

2 Answers

...connect to your rear speaker wires (left/right) that sends the signal to the converter and switches it to RCA level outputs. You would then just connect an RCA cable from the converter to the amp and ...

Question about Kenwood Car Audio & Video

1 Answer

...need service. If it only does it under load, get a multimeter and check that the speaker wires are 4-6 ohms between them, also check from each speaker to body of car, there should be no

Question about Kenwood Car Audio & Video

1 Answer

...speaker connections are pretty straight forward unless you are going to connect subwoofers. At the back: FILTER: leave off unless you are going to run subwoofers OPERATION: Leave it on sterio unless ...

Question about MTX Car Audio & Video

2 Answers

...rca cables and the speaker wire going to the subs. any help is GREatly apreciated ! starting from amp,what is the rca connected directly to. headunit or adoption? its connected directly to the head ...

Question about Car Audio & Video

2 Answers

...Connect speaker wires in proper phase. Double check all of your cinnections. Insta the fuse and crank it up. Any questions feel free to contact me at [email protected] A thumbs up would be ...

...wires into factory speakers to power amp No,  the voltage level that goes to your speakers is way too high,   You will damage the input circuit on your amp.    You need a line ...

Question about Pioneer Car Audio & Video

1 Answer

...connect an LOC to e39 1997 radio cassette business player so i can install an aftermarket amp Hello randon_dicks, The inputs to the LOC should be tapped from your rear speakers. If you have the color ...

Not finding what you are looking for?
MTX Thunder 3401 Car Audio Amplifier Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top MTX Car Audio & Video Experts

Jose Ramirez

Level 2 Expert

264 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a MTX Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...