Question about Washing Machines
...washing machine will start cycle but get stuck at end of wash, doesnt go onto rinse or spin any help please? see the next steps and use the common sense: God bless youWhen the cycle doesn39;t ...
Question about Washing Machines
Washing machine won't wash I.e. bowl won't turn in wash cycle or spin. Fills with water ok. Will drain if start button is reset. Rear panel removed, drive belt in tact. Washing machine won39;t wash ...
...won39;t work Its either in the lid switch or timer. Examine the lid switch. Try starting the wash cycle and press in on lid switch to make sure it activates. If the lid switch is good and you dont ...
...or spin. just keeps washing cloths Generally this is caused from a bad timer motor. The timer motor makes the washer advance through the different cycles. Replacing the timer should fix your
Question about Frigidaire Washing Machines
machine but have to make sure it doesn't burn down my house as it gets VERY hot. Thanks If the unit is washing properly, as far as you can tell, but it won’t stop spinning, then I would have a
...washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won39;t advance. Then you need to replace the timer. It may be ...
washing machine top load won39;t start. I have checked the power from the wire going to the timer.The door latch switch is working and still it won39;t start. my hoover washing machine do not stop
...Washing machine won39;t drainWhen your washing machine won39;t drain, it could be as simple as a kinked hose or as complicated as a faulty impeller on the pump. Overloading your washing machine ...
...washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won39;t advance. Then you need to replace the timer. It may be ...
washing machine won't turn on washing machine won39;t turn on OK, you have a model with a mechanical timer. Try advancing the timer to the spin portion of the cycle and seeing if it will run ...
838 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
256 Questions
168 Questions