Question about Kenmore Washing Machines
...replace the belt if it looks at all cracked or frayed. If this dryer is not a 417 and/or does not have a rear bearing, it's best to get a maintainance kit (belt, idler pulley and drum rollers) and ...
...dryer squeaks model frigidaire fex831cso. drum bearing needs replaced If more than a few items of clothing are put in,my Frigidaire Dryer will not tumble. (Sometimes it will start tumbling, but then ...
water if bad. One on the lower end of transmission.which is part of the transmission. Whole tub basket unit must be removed from the case to replace either the tub bearing and seal or the transmission
Question about GE Washing Machines
...bearing needed to be replace on my dryer? GE front load dryer....Model # PDSR473ETOWW 1994 model............excellent condition....just starting to make squealing or squeaking noises. Should I stop ...
...dryer belt, rollers, pulley (a package deal with RepairClinic) and the felt bearing/seal. May as well do a full replacement of the likely components that are causing the squeaks and not spend ...
...replace a belt? Could be one of 4 problems: Worn or loose drum drive belt (Looks like a large fan belt) (New belt cost $8) The rear bearing(s) is bad and needs replacing (part cost $18) The front ...
...jarring. There is a hub and bearing that needs to be replaced you will need to have this serviced by a qualified tech. The whole front of the dryer has to come off and the basket needs to be
...Model 94812301 Stackable Washer/Dryer It vibrates and "walks" terribly during the spin cycle. The clothes are not off balance and the washer is not overloaded. try adjusting the feet on the bottom. ...
...replace both the washer and dryer? This unit is in a rental prop[erty so we do not want to over invest. Thanks you If you need the whole housing we have it available for about $45. But usually you ...
838 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
256 Questions
168 Questions