Frigidaire GLTR1670A Front Load Washer "accured" Questions

What should the ohms reading should be for the water temp sensor I checked it and I got a reading of 1.5 ohms Water temperature sensor is a special resistor called a thermistor as the resistance ...

gltf530ds0 cloths wet after spin water comes in after final spin Hello Dallas Hart - Is the washer making a humming noise? If so, either the drain pump/hose is clogged and needs cleaning. If not, the ...

washing machine leaks There can be many sources of leaks in a washing machine. In order to accurately determine the cause, you will need to remove the exterior washer case on this model to inspect the

Door is locked, clean clothes inside The door will not open, so I can put clean clothes in dryer Hi tdudley770 - From what you have described the dryer may possibly have a communication problem with ...

I found Mold in my home, how do I test it? Instead of DIY and inaccurate mold testing kits, we suggest you use a professional mold testing service. Air sampling is the most accurate method for ...

We have a Kenmore Elite that overflowed during one of the fill cycles. Water level setting was in between the blue dots and this caused the valve to fail, is this accurate? We were doing laundry and ...

Why does it fill with water then just stop? Hello. Based on the cycle progression and the symptom you describe, there could be a problem with the motor control board. This unit, after pressing the ...

Frigidaire front load washer. E46 error. replaced control board. Still have same error code. Is there a way to clear the error code and reset the washer with the new board? Hello CJ Lou - Typically ...

leaking water from the bottom front My washing machine started leaking water from the bottom of the machine, in the front. its not any of the hose connections. Use the attached video to show how to ...

mildew odor There is a solution that you can purchase for this odor. It's called Refresh. We have parts and supplies here at Accurate Appliance Repair & Parts Supply. We'd love to assist you with ...