door lock and switch assembly to the front panel. Once the screws are removed, lift the door lock and switch assembly then pull it away from the front panel. Take the door lock and switch assembly out
door lock seems to be in working order. Still won't spin. Any suggestions? the door switch needs tobe replace it is faulty i have had this problem in the past.changeing the door switch will solve this
door lock failure Hi there, my maytag neptune washer is refusing to start a load though the door seems to be sufficiently closed and locked. the lock button keeps going off and accompanying with a ...
...Door lock error A Door Lock Error occurs if the door cannot be locked. It will try to lock it 6 times before displaying the error. Potential Causes ? Door Lock Mechanism broken or removed from the ...
Question about Frigidaire Washing Machines
...door lock indicator light "on") after cycle has completed. I have tried restarting the cycle and allowing it to complete as well as unplugging the machine. Maytag support told me to remove the ...
door lock fails, the unit will not spin. If you suspect this is the reason your washer is not spinning, do a check of the error log and you will find an E47 error has been logged. This error indicates
Question about Washing Machines
...you do also replace the wax motor and spin switch.the spin switch and wax motor are next to each other in a bracket above where the door closes top of door jam.where the door lock mechanism ...
door lock mechanism. "Shuts OFF In The Middle Of The Spin Cycle: During the spin cycle, the machine control monitors the door lock mechanism to ensure the door is locked. This is done through the door
...door lock/safety switch this wax motor heats up when 120vac is applied by the washer controller during spin cycles. As this wax motor heats up it acts much like a automotive engine coolant thermostat ...
...door lock assembly. For that open the door and remove the four screws that hold the front panel. There are two on the door hinges and two on the other side. Then remove front by rolling the edge out. ...
1,216 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
650 Questions
256 Questions
168 Questions
