...Stove. The ignitor is not working. How do i access the ignitor wires for the griddle. Do I have to take the knob panel off? One wire came out easily but the other one is not accessable. I am assuming ...
stove top burner ignitor. Well - I can only say on my Viking 48 inch - it was located at top RHS of the stove on the 'back wall'. I was advised by an 'come to my home tech' that it would be located at
...won't ignite and heat, stove works fine. most common problem with gas stoves is a bad oven ignitor, doesyour oven usually "click" start?? or use a glow style ignitor?? do you have the model
stove. Ignitor problems Even if the stove is off, the ignitors will click by itself and becomes annoying. I unplug the stove everytime it does this. By next morning, I plug the stove and seems to work
Question about GE Kitchen Ranges
Stove Ignitor makes tik tik sound and the sparks continuously Even though i put off my GE GAs stove top, the ignitor makes tik tik noise and ignition spark appears continuously may be a loose wire on ...
stove top and broiler work Oven won't heat the way to check this is to first see if ignitor comes on or put an amp clamp meter on it. the ignitor needs to draw 2.8 amps or more to engage the gas valve
Question about DCS Kitchen Ranges
...the problem went away on its own. I took my knobs off to clean underneath my gas stove and the ignitor switch kept popping continuously. Once the knobs dried out it stopped. It took about 20
Question about Maytag Kitchen Ranges
..."appliance parts" and then entering the model number of your stove. Look for ignitor and you will be good to go. Also check out a few different sites as the prices of the parts can vary quite a
stove does not click anymore to automatically turn on the gas. Sounds like the ignitor control module is bad, if none of the ignitors are working. If it is only one burner with a problem, it is likely
stove. The ignitor you remove should have a manufacturer part number on it. No calibration required on mine - a sealed electronic unit. Probably about 10 wires that need to be R&R'ed - they are on
137 questions posted
Usually answered in minutes!
353 Questions
213 Questions
158 Questions
123 Questions
110 Questions