Question about Kenmore Kitchen Ranges
...GAS to stove, then just clean the holes in the burners with a soft wire brush. Then turn gas back on and immediately relight pilot lights. If that sounds scary, call your gas company, they might come ...
...clean the area and, try again oil and grease coat the burner gas plate and isolates the ground that the spark needs to be able to "jump" to just to be clear I am assuming that you can in fact see a ...
gas stove, approximately 10 years old. Try to take the burner off and clean it. If cleaning it does no good then replace it. You can get a new one at your local appliance store Hello, Sometimes just a
Question about Kenmore Kitchen Ranges
...gas at the igniter electrode. Make sure the aluminum bezel below the burner is clean as it is part for the electrical circuit. Make sure the spark electrode hasn't moved away from the burner. Make ...
...gas burner). It receives power from the electrical outlet that the stove is plugged into. Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) ...
gas burners will not ignite ater cleaning stove top hi friend, On stove top burners that have sparklers that are not visible at the burner head, the burner heads have ignition ports. If the sparklers ...
Question about Kitchen Ranges
...gas is real strong and then it lights and sounds like an explosion. Where is the problem -- in the oven burner or a stovetop burner?If something got spilled on a burner ring and clogged the small ...
...gas comes out b/c they get clogged with soap from cleaning. It really is an inconvenient stove to clean and I have yet to find any removable trays to buy that might fit, and that can be put in the ...
...gas can't ignite. The solution is to clean the burners thoroughly. Use a toothpick to clear the small vertical holes, then allow the burner to dry completely and try lighting it again. If it doesn't ...
a tube from the ignitor to the burner head. that is where the gas get ignition. now look at the burner head, there should have 2 small pin hole align with the tube. use a paper clip clean out the hole
137 questions posted
Usually answered in minutes!
353 Questions
213 Questions
158 Questions
123 Questions
110 Questions