Frigidaire Gallery GLEFM397DS Electric Kitchen Range "bake element stove work" Questions

...element. HELP thank you KW I have close to the same problem. My elements are not blown apart, but all of the suddden my bake and broil elements do not work at all. Same model...PLEF398DCB Hey there. ...

bake or broil elements won't work. i forgot to turn off the power when i attempted to remove the baking element to to clean the bottom of the stove and it sparked,now the baking nor the broiling ...

...bake element has failed. They cost around 8 to 20 dollars. You will need to unplug the stove first. (Shutting off the stove breaker is good to do before unplugging the stove as an added precaution). ...

...bake element was lifted up and shorted out (lots of fireworks). Replaced baking element again but element won't heat up. Broil element works fine as well as glass stove top elements and clock etal. ...

...bake element .To change this turn off power to the stove and unplug remove 2 or 3 screws holding the bake element and remove the wires to the element by loosing the screws on the terminals note ...

...bake element has gone out and just the broil element is heating the oven. It is very common that the broil element is either powered by 120 volts while the bake element is energized in bake or it is ...

...bake element dont work. What could be wrong The bake element on any stove can burn out. It is easy to replace. First disconnect at least one end and check it with an ohmmeter. If it is defective, it ...

...bake element underneath. It is probably melted or broken in some area. It it does need replacing unplug the stove from the wall & remove one of the back panels at the back of the stove which access ...

...grandma a cake for her birthday b4 she gets home maybe a loosing wire. move the stove , disconect power and take the cover and look for a loosing wire at the bake element or a burning bake ...

...element in the stove is not heating. Broiling element and all other functions of the stove work fine. I have unplugged the unit from the wall and reattached without fixing it. It appears that the ...