Polaroid TLA-01911C TV "unplug turn" Questions

turn on. Red standby light is on. goes out when power turned on, stays out for a few seconds and then comes back on. make sure u cycle main power switch before u unplug then unplug wait 30 seconds and

...turn on. After a few unplug and plug it turned on. my son turned off the tv now knowing what happen. now it would not turn on after more of the unplug and plug it turned on but last night every one ...

...unplug it and push the on/off switch...plug it back in and see if it will turn on Thanks Fred31; I did that and it worked for a while...we were afraid to shut it off, so we just left on for a couple ...

unpluging tv to turn back on when tv is turned off at night, it must be unplugged in order to turn it back on again the next day. Tv will turn on, off and back on without unplugging if done within a ...

...after turning on it turns off in about 8 minutes and keeps turn off and on. do a hard reset its called by turning off, unplug from wall leave unplugged for atleast 2 hours then plug back in and turn ...

TV only turns on after being unplugged. What's wrong? So my TV has decided that it will only turn on after being unplugged between uses. It will then turn on once, and remain on until powering down. ...

unplug to turn off tried to turn tv off,cannot turn power off to tv from remote or at tv.no volume control or channel contol.no channel,volume,or any other button either on tv or remote.unplug tv plug

...unplug main board or inverter board and plug in in and turn power tv comes on. which is bad main board or inverter First, it does not make sense if you unplug the main board from the power supply and ...

...turn on. I press the power button, I hear a few relay clicks, and it turns off. Steps I did so far: There where two 100uF 25V that where bulged that I replaced on the Y-sustain board near the power ...