...all of the burners are turned off. They are not hot. If it's the light that indicated the element is on, replace the switch. If it's the light that indicated the element is hot, replace the
...light for each element you just replace that element. If there's one for the whole surface or each side you'll have to figure out which element is causing the problem. I have a whirlpool smooth top ...
Question about Frigidaire Kitchen Ranges
element light stays on after all power control knobs are in off position? Good Afternoon Cindy, I see that you are having trouble with the element light staying on after all power control knobs have ...
element - works fine now but surface indicator light remains lit. Any thoughts? Thanks, -Dan Hi, You will need to change the burner switch as well. It shorted out when the element went bad. Please let
...element has its own hot-light, then you know which element is bad; but if you have just 1 hot-surface indicator, your problem is figuring out which element is bad. That takes an electronic technician ...
...light to stay on. The switch that controls the element is bad. Unplug the range. Open the switch control console and replace the defective switch. Make sure the range is unplugged because of high ...
'element on' light then the corresponding control switch has failed. Each control switch contains a switch that will illuminate a lamp to indicate a burner is on. This switch has probably stuck closed
Question about Whirlpool Kitchen Ranges
...element does not work red indicator light comes on/stays on, will not go off since element stopped working. Neither small or large element works. It is telling you that you have a problem with that ...
fan oven element will not switch off red light stays on fan not running My cannon 10450g oven stays on when the oven switch is off .I have replaced the elements but still have this problem
...light is controlled by a part attached to the element called a limiter. For your model, the limiter is not available as a seperate item. The element/limiter assembly has to be replaced as a single ...
276 questions posted
Usually answered in minutes!
353 Questions
158 Questions
123 Questions
110 Questions
92 Questions