Saeco Odea Giro Plus Coffee Maker "stuck brew" Questions

...brew group gets stuck . it seems that the brew group only makes a half turn (the two arrows are not lined up). I know how to get the brew group back (un-stuck) but the problem is it happens again ...

...brew group and it is now stuck in the remove position. I cannot replace it in the machine. The lever that says push is stuck in the pushed position On the inner side of the brew group (The side ...

...brew unit gets stuck and if removed in order to reset the alignment of the gearing wheel in the machine, it does not align in order to get the brew unit back in place. Problem started when descaling ...

...brew group is stuck and will not come out I hope one of this two solutions solve your problem. 1- The brew group is out of place. Turn the machine on. Close the service door. The brew group is ...

...brew group and it is now stuck in the remove position. I cannot replace it in the machine. The lever that says push is stuck in the pushed position Hold brew unit in your hand like you are about to ...

...stuck brew units. Sorry I cant be more help with this problem, but I hope its just a soiled brewunit, and once you've removed and cleaned it, It'll work fine again. Weekly cleaning tablet ...

...Brew group stuck? Close service door and insert only the tall grounds container. Tilt it so it fits in under the flat coffee pat rejection scoop on the left hand side of the brew group as this is ...

...brew group that gets stuck and does not cycle properly. First, you're going to need to get the brew group out. Check this out to get the brew group out. You need to remove a screw and pull unless ...

...brew group from saeco expresso machine Group is stuck in mid cycle due to some obstruction. You will need to have it serviced. Though it's possible to jiggle and pull it out. The machine will not ...

brew group is stuck, i cant get it out help please Turn off the machine - open the service door and see if u can tilt out the tall dregs container and remove it and the drawer. You need to get it past