Saeco Odea Giro Plus Coffee Maker "espresso machine hot" Questions

...does not work properly The hot water steamer not working properly. Expresso works OK Any coffee maker, espresso machine related sales-support issues you can always get in touch with ...

...fill the watertank with fresh water and rinse again trought hot water. When the water finish your machine is descaled.Then press hot water/steam button for 5-6 seconds and light go of. That is

We've descaled and the light still appears on the saeco odeo giro Have you done as described in the manual: Press the hot water button for 6 seconds to deactivate the descaling light.

...hot water comes out of the frothing nozzle, the water level is fine in reservior, beans in the compartment and dregdrawer is fine The tap valve is leaking inside the machine needs new seals.If ...

coffee not hot enough. Can heating be increase & how to do it there is a thermal switch that sets off @ boiling so the plastic unit does not melt check inside the thermal rating if @ 240 f can be ...

...the knob on top, the red exclamation point starts to blink and no steam or hot water comes out. The machine will still make coffee as usual. Check the end of the steam wand that might be

hot water / steam is not in the right position. • Flashing rapidly:Ventilate the water system If it's the bottom light.. That's the descaling indicator.. Hold the steam or water button for 10 seconds.

the machine is alarm descal? opens steam valve knob and hold hot water button 10 sec and error msg it will disaper!

Water is leaking in the back of the machine. What needs to be done? It's from hot water/steamer distributor. Must repair at once, cause can fault other things (printed circuit board)

machine stock on dezcaling Press and hold the hot water button for about 10 seconds. After the delay, the descaling alarm will be erased :)