Saeco INCANTO DELUXE Espresso Machine "ventilate hot water close knob" Questions

...Ventilate" message stuck on screen. It says to reload the circuit (what is that?) Then have to press button 26 (hot water button) and it should warm up and then say "Select product, ready for use" ...

...ventilate'. If I turn the stem knob on the display says - after a few secs - 'hot water - close knob'. I cannot seem to budge it from this senario even if I switch on, off etc. Have you tried using ...

will be displayed 11. refill water tank 12. ventilate will appear on the display 13.press the hot water button and allow to run 14.ventilate will disappear,warming should be displayed. 15. job done !!

...Ventilate. I follow the manual i.e. press button 26 and open the knob for hot water then close knob and press button 26 again. It does not work and the message Ventilate does not disappear. bad chip ...

...Have tried to load circuit but no water / steam flows out of nozzle.. Hot water and close knob appears, the back to ventilate Let some water run through the water pipe and it will say ready for ...

...ventilate error by pressing the button for Hot Water and then opening the steam knob. You should hear the pump run and water should start to flow from the steam wand. If it doesn't, try removing the ...

HOT ON TOP RIGHT HAND SIDE.TRYING TO LOSE VENTILATE I've replaced the steam valve assembly because the machine was leaking. The 'ventilate' message was showing before we did this...we can't get rid of

...ventilate have waited and pressed 26 + does coffee but then steam not strong enough again Probably a broken "Steam Valve Cam". They are plastic & prone to failing with consequence that the ...

...ventilate message Try this run the hot water cycle for a few seconds, it that works, try steaming if you get the message again clear it by running the hot water cycle and then go to steaming, this ...

Try this, after opening hot water valve, push the knob in when it asks for ventilate. If that works then contact your nearest gaggia distrubutor and ask for a new stainless steel steam valve assembly