...ink carriage to center 2. Pull out power cord 3. Pushed carriage to far left (should slide easily) 4. Used paper towel and wiped purge unit a lot of times (press down to soak paper towel with ink). ...
Question about Canon PIXMA Office Equipment & Supplies
...ink carriage stuck), though not sure what it does actually mean. I moved the carriage back-and-forth, blasted compressed air and checked for paper jams. When nothing worked, I looked inside and saw a ...
carriage assembly has grease or ink on it and needs to be wiped with a Q-tip. Sometimes the cleaning assembly on the right gets stuck in the up position and stops the carriage. Service error 5100 is a
Question about Canon PIXMA Office Equipment & Supplies
...a torch, gently tug the ink carriage to the left of the rails.Clear any paper jammed in the right of the ink carriage.Lightly press the cleaning sponges down, (I used a long pen)Restart the
Question about Canon PIXMA Office Equipment & Supplies
...ink carriage to center 2. Pull out power cord 3. Pushed carriage to far left (should slide easily) 4. Used paper towel and wiped purge unit a lot of times (press down to soak paper towel with ink). ...
...carriage is stuck on the right side. I can not free it by tugging on it. Is there a way to remove the plastic top so I can access the carriage to free it? Thank you very much Here is what Canon ...
...ink carriage to center 2. Pull out power cord 3. Pushed carriage to far left (should slide easily) 4. Used paper towel and wiped purge unit a lot of times (press down to soak paper towel with ink). ...
...ink carriage to center 2. Pull out power cord 3. Pushed carriage to far left (should slide easily) 4. Used paper towel and wiped purge unit a lot of times (press down to soak paper towel with ink). ...
...carriage is not moving properly or there is ink or grease on the encoder. One time I found a camera card inside stopping it, but usually it's just grease on the encoder strip behind the carriage ...
...ink Open the main cover so the cartridges/head moves into the centre. Pull out the mains lead so the machine is dead. Gently push the carriage all the way to the left. Shine a torch into the right ...
640 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions