Lexmark T 640 - printer - B/W - laser "page" Questions

Why does it print black pages? It prints a half Why does it print black pages? It prints a half of a page then it is all black and the next page is all black. maybe the inklevel is very very less Try ...

Network printer cutting off page # and page name at top & bottom of page when printing to a network printer (I work in a hospital) the patient's name and MRN # and page is half cut off because its set

The printer is printing an addition page each time a page is sent when a page is sent to the printer it prints the sent page, however it is also printing a page that reads @PJL SET LIMAGEENHANCE=OFF. ...

I have reset the page count and it still shows 300,000 copies the fuser was replaced twice Hi, There are two types of counters one is the permanent page counter and other is the Maintenance Page ...

T632 lexmark getting dirt on printed pages pages are printed dirty on both faces, pages are turning lighly grey Hi Krimlakh, Try replacing the toner cartridge first. Usually when this happens the ...

job did not finish and in the middle of the job it started to print **** or a single square dot per page... To check if this is a hardware issue, please print a menu settings page. The purpose of this

how do i find out what my current page count is on the Lexmark t632 Print a menu page: press menu right button until utility menu is displayed, then press select (lcd display print menu), press select

how do I print config pages for Lexmark T630, T640, T632, T642, and T650? 1 Make sure the printer is on. 2 Press Menu until you see Utilities Menu, and then press Select. 3 Press Menu until you see ...

makes a noise. Print black page havinga discription of the noise would help. but if your printer is making a noise its probably the fuser wiper because of the excess toner of printing black pages. ...

...printer with an ip address - will not always print and sometimes it prints just on the top of the page and will do the on MANY pages Try printing a PCL Font page from the printer itself and see if ...