LG LDF8812 Stainless Steel Built-in Dishwasher "clean top load direct" Questions

...top rack do not get clean. We thought maybe it was water not coming out the top, or food stuck somewhere, but do not know how to fix it. Any help would be greatly appreciated. had a simular problem, ...

...this noise. Add water in the chamber direct manually. Close the door and start the cycle. If the running is Ok, it is air trapping problem. Next wash load it will be alright. Otherwise clean the

...clean dishes in and they will come out dirty too! Have tried all dishwasher soap types and brands and drying agents. Always scrape and rinse dishes prior to loading. Dishes loaded various ways but ...

...clean. Especially the top rack. Checked filter, drain hose and arm. Also checked salt and rinse aid. Water appears to be retained in the filter - should this happen? HI The strainer is located ...

...clean, and made sure the food trap at the bottom of the washer is empty, yet the problem persists. I think it has to do with the detergent not dissolving and dispensing. Is there some reason the ...

...top tray. Took care of some of the mold, but not all. So i put vinegar in the rinse compartment (I swear on vinegar and use it for everything...even on my hair to break down the hard water build up). ...

clean the dishes, and as you say they are spotty with debris and it seems the drying cycle is not working properly. The top rack seems to be worse. We are very disappointed with this expensive product

...top, reset the gasket tightened it all down...no leaks! The pump I refer to is located directly below the spray arm inside the washer. Easy to get to. Another tip was to look for a split sspray arrm ...

...top of the sink to prevent back flow. Also is connected to an air gap make sure the hoses are clear. If all this is fine, it means the unit is not removing all the water or food is being bought in to ...

clean, I used a flashlight a dental pick and some yoga moves and found hair, easter grass and god only knows what else it was wrapped up behind the impeller shaft. Yoga wasn't working so I removed the