Yamaha HTR-6030 Receiver "error check speaker wires" Questions

check and setup your speakers but if the speaker in question is a bipole, dipole, oe omnipole those types of speakers will fool the YPAO and you might get a result that tells your the speaker polarity

...error without speakers attatched, you will need to send it for service. While it's at service, check all wires and speakers for shorts with a meter if you can. This is the most common failure of all ...

...check the speaker itself, try swaping another one in the position to see if the problem is solved. Hope this works. This error means one of the speaker wires (cable) is shorting out. The best way to ...

...Check the receiver without speakers to eliminate any failure. The error should go away. Now carefully connect the speakers again, take care not to short-circuit the receiver. Also check the impedance ...

...resistors that time not fix heat sink then all replaced power on error overload with speaker and without speakers also coming error disconnect ol wire no chang pease help any expert amplifiers ...

...Check speaker wires, any wire seems shorted and causing Protect Unplug error message in receiver. Good way to sort out bad wire is plug one speaker at a time, turn On receiver check, turn Off, then ...

...error code 11 and shut off by itself after few seconds.check and disconnect all speakers, unplugged power from wall and still showing error 11. am missing something in here please help error code 11 ...

...error sign and unit wont power up to avoid further damage. Visual check by experienced tech is required to fix the issue. Local repair shop will help you for that. Turn the power off the receiver and ...

...check SP Wire" error what parts needs to be changed? Hi Carl, typically this would be an indicator that one of the bare wires from your speaker connections is coming in contact with the back panel of ...

...check the speaker wire that must be broken in between... Hi and welcome to FixYa, The Yamaha displays such an error message not only because the speakers wires may be touching but because the ...