Question about Panasonic Audio Players & Recorders
...Check your speaker connections for a possible short circuit. Best way to do this is to remove all speaker connections (with the device turned off) and then try turning the device on. If you now don't ...
Question about Technics Audio Players & Recorders
speaker to check which component is burnt . Hi, Does it have warranty? Try switching speakers connections to check if the problem is with the speaker or the unit. Check if the speakers were compatible
...music was playing at the time, so the volume was not high. Any ideas? check if left speaker is shut off /connections one speaker my be on a side the other on b side check all speaker ...
Question about Yamaha Audio Players & Recorders
...If it still will power off, the unit is probably faulty and should be repaired. If it does turn off only with speakers connected, check the speaker wires and the speakers, the problem will be
Question about JVC Audio Players & Recorders
...check your speaker wires connect into "output1" or "output 2" hint: each output will have 1 for left and 1 for right speaker. Each Left or right speaker will have 2 connection 1 red color (+) and 1 ...
...Check your speaker and speaker connections. Do you have normal display? If so, after checking your speaker and speaker connections and they are ok, you might have a problem with one of your output ...
...speakers as above, then let me know if you need further assistance. The message could be erroneous and may indicate a fault with the receiver. Hope this helps. Regards, BElectric. Check SPEAKER ...
...speaker works, then cables are ok. 2) Check speakers - Connect each Surround speaker to RXV's Centre out. If it works Speakers are ok. 3) Check RXV - Set it on DTS or Dolby Digital Connect RXV's ...
...check ALL the speaker connections at both ends!!!!!!!! (@ speaker & Receiver) Be certain ALL connections are tight & that NO strands of wire are shorting out the connections by touching each ...
Question about Sony Audio Players & Recorders
...diagram check the speaker connection,check the speaker resistance,if it found ok.then open the av receiver top panel and check nearer component of left speaker connection.check the out put power ic
106 questions posted
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
89 Questions
