Onkyo TX-SR605 Receiver "video input" Questions

...to do with the malfunction? Thanks in advance for your help. John Check that the input video mode for s-video inputs is AUTO or S-VIDEO. setup>manual setup>input setup>input video

...Video input. 7. Select input the DirecTV is connected to at the Denon, at TV select component input Denon is connected to TV. 8. On front of denon press the input mode button to select aut If the RCA ...

...Video input. 7. Select input the DirecTV is connected to at the Denon, at TV select component input Denon is connected to TV. 8. On front of denon press the input mode button to select aut If the RCA ...

...video input - it won't work, because this receiver don't have any video processing circuit. So HDMI input video goes to HDMI outout connector. Composite (RCA) video input goes to Composite outout and ...

Video Input)on the TV, the following the info on Page 20 in HTR-5280 manual. Make sure that you are selecting the correct input on the TV for which input you are plugging the receiver into. Then press

...VIDEO INPUT jacks. With the initial settings of the TX-DS898, the VIDEO 3 and VIDEO 4 input sources are set for the COMPONENT VIDEO INPUT 2 jack. If the video connection is made at COMPONENT VIDEO ...

...input to these is from whatever is connected to Video 1 In. The other inputs: Phono, CD, Tape/MD work as expected. This happened all of a sudden - I hadn't used those inputs since a few months before ...

...Video you cannot then use composite on that same input channel as it will override and disable the composite. Then you only need to choose the appropriate input on the TV when you switch sources. In ...

...(1-RCA through 4-RCA) to the various Sources. You may need to go to each Source and turn Video Convert to On. Select an Input, such as SAT. Go to Menu/Input Setup/Video/Video Convert and select