Yamaha RX-V661 Receiver "auto setup" Questions

...Auto MCACC Setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level. After ...

...AUTO SETUP After following the manual to the letter, the setup procedure advances to the point where the loud test tones are heard from the left front speaker only. At this point I get an E-1 error ...

...Auto Setup I have the RX-V659 which is very similar to v661. After the auto setup, the subwoofer (Polk PSW404) will not work. During the auto setup, the sub works fine. I had the unit set up ...

auto setup. Also, as it is currently set, we are getting a lot of volume from our rear speakers and very little from our center and front speakers, any thoughts? The manual is available at retrevo.com

...auto setup but it makes no difference The microphone included with this receiver is for audio adjustments only. That's the "Audyssey Laboratories' MultEQ® six-point auto setup and room calibration ...

hi I have 5.1 speakers but when i do the auto setup it displays 5.0 st not 5.1 You need to setup subwoofer in setup menu.

...Digital, or Auto" and you can double check it in the "On Screen Menu", "Manual Setup" "Audio" Hope this helps, if you still have an issue, check the "Source"(DVD,Cable Box, etc) setup mode as

...on TV processing speed. You can turn auto-sync on in Setup menu / Sound Setup / Lipsync / HDMI Auto. Or if that doesn't work for you, you can set a value in milliseconds manually in the same

...Auto Setup on my Yamaha rx-v463 receiver I have a problem with the Auto Setup on my Yamaha rx-v463 receiver. I see the OSD that says hit enter to start on the remote, but when I do that it doesn't ...

Sound not working What is the ASb display above the volume on the receiver? HI Auto Stand BY = Asb you can remove it follow instruction home -setup-hardware- auto standby hope this helps Good luck