Kicker Flow EB72B Personal In Ear Noise Isolating MP3 Player iPod iPhone Black Headphone Monitors "headphone plug wire" Questions

...headphone plug. You can go to radio shack, but their headphone plug is very large but you won't need to solder anything. Cut the wires and strip off the plastic. You will see very small wires coated ...

...plug (left headphone works but right headphone doesn't). I recently purchased a replacement jack from radioshack for 3.99 and i've cut the wires, soldered them onto terminals, etc but the sound ...

sony mdr v150 wiring plug adaptor 4 wires green, sony mdr v150 wiring plug adaptor 4 wires green, red and 2 copper . how do i solder? The green wires go to the left channel (Plug tip). The red wires ...

...out a little so that one contact in the jack contacts both sides,you will hear the dead side come on. If it does not,the wire is either broken in the plug ,or where the wire goes into the

...headphone. When you plug it and unplug it from your audio/music device, the little 3 or 4 wires disconnect. The smaller the headphone, the more chance this will happen. To revive your headphone, you ...

...plug at Radioshack and solder that on. Mkae sure to burn the tips of the wires for a second or 2 with a lighter, this will remove the protective coating on the wires. If not then the connection won't ...

...headphone? If so, then the wire needs to be repaired/replaced. You can get wire and a new plug at your local Radio Shack or similar store. Some soldering will most likely be required to accomplish ...

...Headphone wire (the wire going to the plug) has been, cut can it be repaired ? Here is a link to how to do it:http://www.metacafe.com/watch/1045725/how_to_solder_how_to_repair_headphones/ I hope this ...

...plug part on my headphones seems to have snapped off of the wire and I cannot find it, is there any means of purchasing another plug and attaching that to the exposed wires? This should help: ...

Headphone wire cut can it be spliced back together sennheiser pxc Son chewed thru wire coating Then I cut the wire to splice back together however I have been unsuccesful. It rather depends where the ...