Mitsubishi WD-73734 73" Television "getting spots dlp tv screen" Questions

dlp tv WD65733 has white spots, like stars on screen, what causes this If you get White or black dots all over the screen (DMD symptom) If you get a pixilated picture (DMD Board) Where can I buy a DMD

spots appearing on the screen. The DLP chip will need to be replaced. Bright white spots on mitsubishi wd-73833 because DMD. below is example for worst bright dots. If your case like pic below, change

...getting little white dots up to 5 what is this and who do we contact Mitsubishi that the one,who u should contact.Talk to them make some kind of deal with them to help u to do a repairing or replace ...

...getting the black spots on my screen as well. It is dust settling on the bottom mirror. Yoiu can call Mitsubishi and spend 150-200 on getting it cleaned, or you can do like I did and take the front ...

...spots appearing on the screen Hi there it looks like you have a problem with the DMD board some of the micro morriors are getting stuck in the on or off position and that is the reason you have this ...

...spots still there? If they are then your light engine is bad and needs to be replaced. If they go away, then your digital board needs to be replaced. And yes you can get that board from just about ...

...tv is a DLP projection one. In it the image is generated by projecting light on a chip that is covered in tiny mirrors that reflect more or less the light towards the screen. In your case some of ...

getting white spots on my mitsubishi wd-65733 65 inch dlp tv.What is causing it?. Hi,all HDTV have boards that control vertical and horizontal output to their respective areas. They are connected to ...

DLP based, you probably need a new bulb. If it's CRT based, you can bring them back to life with a simple adjustment. If it's a CRT (depending on model) the adjustment is either on the back, or on the

spots on my tv screen. started with one, then two and now up to 9 the reason this is happening and the problem is getting worst is because the DMD board is starting to go bad some of the micro mirrors