Samsung RF265AA Bottom Freezer French Door Refrigerator "refrigerator temp 42 degrees" Questions

...CONTROL SEEMS NOT TO BE WORKING. TEMP GOES DOWN TO 42 AND STAYS THERE. thats because 42 degrees is the optimum temperature for wine to be at. unlike other beverages wine coolers only go to 42

refrigerator is at 42 degrees and freezer is at 14 degrees what should it be Freezer temp should be at 5F / 15C and Fresh food temp anywhere from 34 to 41F This higher the number in this range of 34 -

...temp is 0 degrees. Then check the door seals around the edges to see if any splits, tears or cracks have messed up the seal. This will cause your compressor to constantly run as it's trying to cool ...

...refrigerator has 2 controls, the start setting is usually at mid point on both dials. That should give you a freezer temp close to 0 and a fresh food temp of 38 to 42 degrees. If only one ...

...temp should the fridge and freezer each be? According to FDA safetey specs bacteria can grow at 40 to 140 F degrees .Refrigeration must be below this number but above 32F to keep from freezing. I ...

...temp in fridge questionable...50 degrees for items in door 42 to 44 on shelfs. Additionally the door water (inside) is in the 50 degree range also. Is this a simple obvious fix? It will be a week to ...

True commercial 42 cubic foot refrigerator is keeping a temp at 52 degrees, it should be 34-40. Whats the problem check the coindenser coil underneith ther unit for a dirty condenser coil

temp is 42 degrees. I bought this unit used and it was not cooling and the panel was dead so I replaced the 3 1000 mf caps. It's now cooling fine but the level indicator is flashing. The keg is approx

...Refrigerator PSS26SGPASS 'Frig temp is 42 degress and the freezer temp is 27 degrees. Lights work on both sides and the fan(s?) are/is running. I bought the unit new 06/24/2003 Other than the fan not ...

...temp is 0 degrees.You have to wait about 4 hours for everything to stabilize. If you are still having ice forming inside the freeezer then the rubber seal around the door is probably the problem. If ...