Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum "burning smell" Questions

burning smell Kenmore 50558 what would a burning smell mean? If the burning smell is an electrical smell it could be motor or wiring problems which are best handled by a professional. If it smells ...

...but smell like a burning belt If it smells like burning rubber, the belt is probably worn and slipping. If it's another burning smell, your motor windings are probably shorting and will burn out ...

burning smell. if its a rubber burning smell check the belt and the brushroll. if its an electrical burning smell then dont use it. the motor is overheating and will eventually get hot enough to catch

Motor smells like it's burning Brand new and smells like motor is burning and won't turn on the second time I tried to use it It turns on ,but smells like it burning, I replaced the belt and filter, ...

...burning smell My 9yr old sebo has died. Was working fine, but then went off quite suddenly. A strong burning smell (like hot oil / metal). Replaced the fuse in the plug (this fused at the same time) ...

...smell a burning smell and shut it off. Is the pump gone? Depends, if the the smell was like rubber, then it may be the pump belt. If it is ok, then the pump could be bad, altho the pump wouldn't have ...

...Burning rubber smell means the brush belt need attention. Make sure the brush is turning freely and replace the belt Eureka 4481 very loud. Already replaced belt. Any suggestions as to what problem ...

Burning Smell Hi, I have a Rainbow E series that when I run the vacuum there is a burning smell. I have cleaned the entire unit and filter but still have the smell? I am afraid that the motor will ...

...the brush roll is free not sticky..Next is the belt okay, not jamming on the brush roll making the burning smell...You could take off the roll and run motor on its own ..finding out if its the

...burning smell There are two reason you could be smelling a burning smell- 1. The belt is too stretched out and needs to be replaced. This causes it to slip when the vacuum is on and will create that ...