Question about Kenmore Washing Machines
washer is restarted. The sensing light may also come on during the Soak and Wash portions of the cycle. This is normal. If there's no water, then Page 13 Washer won't run or fill, washer stops working
Question about Kenmore Washing Machines
...washer gets to the spin cycle the lid unlocks and nothing happens. I have tried just "drain/spin", the lid locks, the machine makes a noise like it is sensing and then it just unlocks. I have tried ...
washer washing machine wont unlock on the right side.I reset it but it still has the light that says its locked even when both sides are in the unlocked position. The lid lock is on the right side but
Question about Maytag Washing Machines
Washer Senses one time then the lid lock blinks and the lid unlocks! It won't start or fill MVWX600XW0 Here is the service manual for your machine. Look at 6-4 for diagnostic mode.
...Washer sequence, is sensing lid locks, turn toggle on. The next stage is the washer will unlock the lid, the lid lock led will flash, turn toggle switch off. You will then hear a click, turn toggle ...
Question about Kenmore Washing Machines
...washer, the lid lock light comes on, lid locks then senses laid then unlocks and nothing else happens. Kenmore top loading high efficiency low water washer, model 2800*010, 2801*010 Most likely mode ...
...sensing that the lid is unlocked. There is a chance that you have a wiring failure or a bad control board so it is best to thoroughly diagnose the failure if possible before replacing components. Be ...
Question about Whirlpool Washing Machines
...washer model no W10280447A. When it starts the cycle the lid locks, says it sensing, then the lid unlocks like its supposed to but then when it looks again, and the cycle is to start it just makes a ...
399 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
