Dell 1720dn Laser Printer "tray making loud noise" Questions

...Tray 2 makes loud grinding noise when printing. Tray 1 is as quiet as a mouse. Replaced tray 2 with a known good tray and it still makes grinding noise. In my experience, it was the registration ...

...against the paper. sounds like the paper is not properly in place and the tires are making the noise. Could be it's trying to lift the tray and it can't, determine why; something stuck, out of

...loud clicking noise that's coming from the front where the tray goes. The error was a paper jam, but now it says to add paper to tray. The tray is full of paper. I've turned it off and back on, ...

Loud noise coming from the paper feeder Most noises that are a clicking type is caused by the tray not in position correctly, make sure the tray is free to lift and or is pushed in all the way.  ...

tray 2. making loud grinding noise. possible lift motor? Check that the paper pickup rollers forthat tray are not melted from excessive heat. Take out the paper tray and try to manually move the gears

...tray, when I tried to print a document I got a loud clicking noise from the printer. It clicked about 5 times, with about 2 seconds in between each click, and then the red status light came on. I ...

loud squeak like rollers or gears are turning and are dry. It also makes this noise when it is printing. it most likely has parts that are worn out and need replaced. you will need to have it serviced

...loud noise it may be feeding from the wrong tray. i was trying to copy short paper and it was feeding from the long paper section. this caused it to stick ever time. make sure the machine is feeding ...

tray 1, though it makes a loud clacking noise. I've had no luck from Lexmark support. They're replacing entirely those printers still under warranty experiencing this problem. Still, I'd like to get a

...making a copy. After this, I got the LOUD Woodpecker noise and cant use the multi-bypass tray. I still get copies using paper from the drawer, but the noise is still there. I looks like a gear is ...