Sony KDL-32S3000 32 in. LCD Television "led tv factory" Questions

...Led T.V. and when i turn it on it'll stay on for about 5 seconds than go into stand-by mode, what can i do? Tries tv unplug,replug it back about an hour later for tv to do a resetting itself back ...

LED is ON on your TV. Now press these buttons in this order on your remote (pointing to the TV). i+ 5 VOL UP (+) GREEN POWER button NOW BE CAREFUL! Dont press any keys just for the fun of it!!! IT MAY

...TV has a black screen no display, solid green light. I've tried to reset it to factory default and have not found any swollen conductors/capacitors. remove from mains for an hour, retry and if there ...

...led tv to factory settings? getting vertical stripes Step 1 Press the "Menu" button on the Samsung LED TV or the remote control. Step 2 Press the up or down arrow buttons and highlight "Support." ...

...LED TV FROM ARABIC WITH ENGLISH 48 INCH You would need to do a factory reset From the Sony Forums: factory reset to your Television. Turn on the TV. Wait approximately 40 seconds for the TV to ...

...Led name Unplug TV, backlight goes off. Plug TV back in, turn TV power on and it can now go into an on/off cycling in which you can here the click and see the Power LED go on and off. Backlight stays ...

LED flashes and I cannot turn the tv on...Then 10 minutes later the tv turns on by itself and the cycle continues... DO NOT ATTEMPT ANY REPAIRS, CALL THE FACTORY PHONE NUMBER IN THE OWNERS MANUAL

...Led TV. Both TVs were through the Ethernet. I tried to factory settings to no avail. I advise you to find an electronics expert to check your inside your TV. The TV might have some failed components ...

...Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure ...

led tv There is no such external button. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If