Frigidaire PLEB27T9DC Electric Double Oven "turned fan runs" Questions

...turned on, cooling fan doesn't run and F34 error code appears after a minute or so of preheating. However, if I turn on the lower oven first, the cooling fan comes on and the lower heats with no ...

...the fan is to turn the cooker off at the mains switch, when I turn the cooker back on the cooker fan immediately starts up and runs until I switch off at the mains again. sounds like a welded

...turned off The exterior surface of our MCS130S wall oven gets very hot when we turn the oven off. There is a fan that runs for a brief period when we turn the oven off, and while the fan is running ...

turned off and then started. must wait for stove to cool down and then press cancel and stove will restart Is the background cooling fan running? Also, look under the oven and if possible take off the

...fan comes on when the oven is turned off. The only way to turn it off is to turn the oven on and let it run for 10 minutes and then ithe fan shuts off. Then I turn the oven off and it's good for ...

...fan oven turned on the fan does not operate .have to turn off and manually spin fan.turn oven back on and it seems to work.what could be the problem.thanks in advance.regards fred The fan nneds ...

Fan runs for hours after use If we use our oven to bake something, even for 20 minutes. The fan will run for hours like it's trying to cool the oven down. If I open the door and put my hand inside the

...fan,not convection fan won't turn off Is the oven still hot?? this is a Electronics cooling fan it will run even after the oven is turned off give it some time it should shut off let me know if ...

...turned off. This fan will run for a few minutes to cool down the outside of the oven so it doesn't burn / discolour the surrounding cabinet or workbench. If the fan stays on all the time, I would say ...

...and even called representative. Still could not get it to turn off fan or unlocked door. I have turned off the circuit to the oven. Please help. Have you tried to unpulg it and see if it ...