Frigidaire PLEB27T9DC Electric Double Oven "range clock timer display" Questions

...clock has been preset at the factory for 12 hour operation. When the range is first plugged in or when the power supply to the range has been interrupted, the timer in the display will flash and PF ...

...oven - timer works, but no clock KitchenAid KODE507ESS (this MAY be your model??)... you did not specify?... This link MAY have your DISPLAY PARTS: KitchenAid Range Stove Oven Display Board ...

...range** The part for the timer/clock is # 3196967 and retails for between $167 to $233 at "searspartsdirect.com" and "repairclinic.com" respectively as I type this on June 6/2010. Hope this info was ...

...range for a good 1/2 hour, then plug back in. Unfortunutely this probably won't work, as these clock/timers are notorious for only lasting a few years. You have to blow $150+ and replace the ...

...Range Control/Clock (ERC) The system believes that the control board has failed and needs to be replaced. This page has a list of diagnostic codes by brand and model number. You should check there to ...

...Timer/Clock still work, just not stove burners. I've tried holding the lockout button and it removes the symbol of the lock, but doesn't remove the LOC message and it's still not working. From a ...

...clock that has had 120v running through it for 20 yrs or so. Time to replace for sure. Let me know if this info helps-  have more if needed-  Thanks--Ed These controllers can be rebuild ...

as the clock timer Similar to the digital display not working. My digital display shows but will not let me operate and funtions dealing with the oven. Help. Don't want to throw such a nice stove away

...clock on the digital display stopped working. The oven will not turn on, the digital display is total gone as well. I checked the fuses and they are fine. I think it is electrical. Does anyone know ...

...Range Control or Clock) or the touch pad is defective when F1 error code is present. Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not ...