JVC RM-C18G-1H Remote Control "press sharp tv power switch" Questions

...Sharp tv are:- 0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122 Direct Code EntryPress and hold the SETUP button until the red indicator stays on, then release the SETUP button. Press and ...

...sharp TV? Hello, you can try the search method, you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to ...

...Sharp Television. Hiya this is how i got mine to work.Manually turn on the tv. Press and hold setup on your remote till the light comes on and stays on. Then press the tv button then release. The ...

...press it with something not sharp (a micro switch is what the button activates) and if set comes on get the remote programmed. Your best bet if the set will make it on that way is to get the original ...

...press the magic or device key again to save the settings (light should flash twice to confirm) Many thanks Mark (For low price replacement remotes visit www.sparky-uk.com) need a code for remote urc ...

...sharp linytron it worked on the vcr .the tv is one of those types that you can not change with out a remote.HELP Hello, follow this link to download the manual and the codes for your remotes: ...

...Sharp T.V. We have a JVC and Coby VCR and DVD. Willl you help us out here please! Hello, if you can tell me the model of the remote normally starts URC- this may be printed on the remote or on the ...

...sharp clear that when my Cable company come by , one and all always say, "is the HD because the picture is so execeptional one it. When I say "no", the argue and say that they have NEVER seen a TV. ...

Sharp TV.Is there any way of getting the code? http://www.hifi-remote.com/ofa/codes-tv.shtml#tv If none of the codes work then we have two other solutions: 1. Searching For Your Code If you have tried

...Sharp 27F543 and now the remote would not switch to the SAT mode! The receiver is: DISH Network / Echostar MPEG2 DV3 3800. I cannot go into SYSINFO on this remote - there are only two buttons ...