C3 Capacitor on control panel board replace capacitor from Digi-key Corporation get panel out and see what C3 capacitor says what voltage and uf and temp celcius and order from them solder
...C3 capacitor on the dispaly module. (100 UF, 35 volt, high temperature) The local Jenn Air dealer wanted $211 for a new display module. I purchased a Cap from a local electronics supply store for ...
...C3 on the board, its a 35 Volt 68 mF capacitor that needs to be replaced with a high temp (105 degree C) capacitor . Any capacitor that shows signs of discoloration and or leakage should be replaced ...
...capacitor C3. It is 68 micro farads. I used a 47 from Radio Shack and it works great. If you can find a 68, that would be ok too, of course! My Jenn-air double oven had the same dimming issue. Thanks ...
...capacitor (C3) on the control board (Timer/control Display). Remove the top panel and look for a discolored or leaking capacitor (usually black about 1/2" high 3/8" in accross). Replace the capacitor ...
...C3 capacitor with a 100uF 35V (high temperature - 105 C). Spent $1.69 for the capacitor and 1/2 hour taking the unit out, soldering the new capacitor in, and remounting the upper clock unit back on ...
Question about Jenn-Air Ovens
...C3 capacitor (35V, 68uF, 105C) with a (50v, 100uf) capacitor from Radioshack solved the problem! This is the closed one I can find in Radioshack. Its operating temperature range is from -20F to ...
runs 8 sec the shuts down code mag 3 Magnatron or mag transformer or mag capacitor required or all three
...the touch pad but display is blank I replaced the C3 capacitor on the circuit board as another person on FixYA had recommend and it works fine now. $4.00 versus $180.00 was worht the chance to try
...capacitor labeled C3 on display board, Hard part will be obtaining the 35Volt 68uF capacitor, I'm lucky enough to have a Brother in the electronics design field who found me a couple of high ...
13 questions posted
Usually answered in minutes!
273 Questions
130 Questions
51 Questions