Power Acoustik LT-980/2 Car Audio Amplifier "level woofer" Questions

...when i hook up the amp...what am i doing wrong? Look on amp for a dial or button that says GAIN or LEVEL try ...

can i power 2 12 subs a rockford punch z and a xplode with this amp i found all this **** in my garage and i need to know if it will power all this First of all. Using two different kinds of sub ...

...works great.Just remember this is a high power amp and requires a lot of voltage to operate at high levels for an extended period of time so just make sure you have a big enough power cable 4gage or ...

...level, it doesnt shut down. its driving a size 12" Adire Brahma MK-IV subs. thanks for your help guys Could be a couple of different things. It's more than likely the wiring between woofer and amp is ...

...coil on the woofer. Tried a differen (known good) woofer Same problem. When volume is at very high leveles the woofer plays for a fraction of a second then stops. Nothing on the circut board appears ...

...level so jus unplug the control and set the gain accorindly 1. On the 1000/1 you have a switch for input voltage looks like this... low/high .. ok? where is it set on your amp? if you are using an ...

...@ 0.1% THD + N, at 4 Ohms OTL (Output Transformerless) circuit Pulse power supply Line & High Level Inputs .3-6V Level Adjustment Control (RCA Pin Jacks) 1.2-12V (High Level Input) 80 Hz, ...

...music on, it won't burst your speakers, your ears will give out way before your speakers does, if the amp is for sub woofer, I have it a little more than my speakers level, because i prefer more ...

...circuit in the wired line or a booster amp that does it for you. when you have a huge volume level, the coils will feed back (counter emf ) some of that power back into the transistors driving ...

...blows the fuses in the amp if my subs hit to hard and i dont know why? It sounds like you have the levels improperly matched or the wiring to the sub woofers making an improper impedance match. Make ...