Samsung SyncMaster 931BF LCD Monitor "power cycles" Questions

The screen goes dark. When U cycle the power switc... The screen goes dark. When U cycle the power switch off then on again the screen display returns for about 1 second then goes dark again. I would ...

...hour or more, will show the screen for about a second and then goes blank. Only after I cycle the power 25-30 times (using the power button on the monitor) will it stay on. What can I do? (warranty ...

After several power on -power off cycles it would work fine. Yesterday stayed black. Any Thoughts??? Check for bad caps, see example here: http://s807.photobucket.com/albums/yy352/budm/Samsung%20203B

...time Nothing for you to fix My 917P has had similar problems recently. Sometimes cycling the power switch 5x (pausing between each try) brings it back to life. As screen sometimes flickers, ...

...you think this is an overheating malfunction (although it does not appear to be overheated), or a power plug issue? ferraric, You're halfway there! Now all you need to do is find the "THERMALLY ...

...was working fine for 2 years. A couple of days ago it stopped working. The screen is blank with the power button blinking. i have exchanged the monitor with another which works, so the problem is ...

...power cycles would eventually allow the monitor to display properly. Once the display is on the montor works fine for all graphics.Since it happened on both systems I'm thinking this is a ...

Samsun LCD Monitor power comes on screen blinks once power light (on button) goes off then comes on again. Cycle repeats Hi, It can be due to Resolution issue The graphic card is not set by OEM ...

...cycles should not cause this problem!!! Inspect the units "switch-mode-power-supply / inverter board for the 1 and 1 only bad solder joint, resolder it and unit should function properly. Let me know ...

...not power up After numerous hot and cooling cycles solder joint have been known to go bad and or crack. check link below, press the helpful button ...