Gaggia Titanium Espresso Machine "steam working forums" Questions

...on titanium plus machine I have tried the solutions suggested on this forum (switch off, release steam...) but no steam releases. I just get a message to close steam valve and the ventilate

...steam guage is rather slow to respond and the pointer has become detatched on my machine but it's working well and froths good after about 5 minutes from start up, although I do tend to leave my ...

...I just found the answer on another forum, worked great for me. All you have to do is turn the steam wand on and let the water flow through. It took about a half cup of water coming out of the ...

...working fine and used regularly for almost 3 years since I got it used. Now, it displays the "NEED TO PRIME" message. I am aware of the procedures for priming by forcing water through the steam wand. ...

...working. It makes a huge noise when turned on and looks like water is not running through it. I believe it need a technician. DO you guys have any support in NY area? Thank you If you are unfamiliar ...

...steam. Excellent - I have been trying everything. Priming it solved the problem and I am enjoying an Irish Creme Latte. Thanks Billyd Where did you get this espresso maker? Hi musicgrrl11, Your ...

...working, when it turns on it says warming up, but it tries to warm up for ages but nothing happens, after a while the general alarm message comes up. The water dosn;t come out when it turns itself on ...

working (pump, valves, tubes, etc.). I will report back. Make sure the filter holder fits properly into the holding ring. Try tightening the filter handle a little more. Make sure that the edge of the

...working when this happens, due to what I would term a serious design-flaw. Why? It's the neutral, and not the hot side of the power supply that gets interrupted by the thermostat in this design, ...