HP Compaq Presario Media Center SR1750NX (EL445AA) PC Desktop "back panel" Questions

...back and pushing it all the way to the front (the actual gray box), fixed the problem for me. Just check that the button from the plastic front panel and the actual button (gray plastic with black ...

...panel back about 1 inch (2.5 cm), and then lift it off the unit. _____________________________ WARNING: Beware of sharp edges inside the chassis. _____________________________ Hope this helps. ...

panel back with the other hand. NOTE* The computer MUST be unplugged from power before proceeding! Not only is there a possible issue for Your safety, but also the computer's! You will fry out the Ram

...panel towards the back of the computer to remove it.    Figure 4: Removing the side panel    Removing the side panel    If the front of the case prevents ...

...back on, then the panel, but now when i start my computer, my monitor gets no signal :( Hi Sleekorr ,            All you need to do is to follow steps below1. You ...

...panel out toward the back, then lift it off. Compaq has a manual online if you need other things after you get the panel off. Here's the link: ...

back of the case, you want to loosen the screw, then pull toward you slightly then slide the side panel toward the rear of the case. For more details, refer to page 8-2 of the manual found here: (http

panel, plugged in everything. Now it will not start or boot up at all. The fans run but nothing else. Really got me stumped. My suggestion would be to open the case and unplug everything and then plug

...back nor the front panel. So here are the steps that you can try : FIRST?LIGHT ON THE FRONT AND NO LIGHT AT THE BACK ... Here there are no trobleshooting steps that can be done as it means that the ...

There are "screws"- one regular threaded screw and two I don't understand. They are circular metal rings. look on the back there should be a plastic l shaped tab push down and the panel should release