Dell Dimension 4600 PC Desktop "computer power" Questions

...computer check power power led on motherboard,also check if the processor fan is spinning. if no go then issue with motherboard. hi , it shows that the it's battery needs to be checked and possibly ...

...computer power, remove VGA cable, remove VGA power cable. then 1- connect vga cable to computer. 2- connect VGA power but do not power on. 3- connect computer power on but do not turn on 4- turn on ...

...power to computer After a power outage, When we plugged in our generator for power, i heard some bangs...now my computer has no power at all, other computer is the house is ok Did i kill my computer ...

computer power cable connections. A loose or unplugged power cable is one of the top reasons why a computer doesn't turn on. Perform a "lamp test" to verify power is being provided from the wall. Your

computer won't power up. opened case to replace hard drive. After replacing the hard drive the computer would not power up. Reinstalled the old hard drive and still the computer won't start up. Check ...

...computer. 1.Power supply to motherboard. (20-pin connector on motherboard) This connector has two pins in it for Soft Power On. The power supply does not connect directly to the Power On switch. The ...

power to the computer, check the power supply on the back of your computer - next to the power cord connector. Many power supplies have a fuse or circuit breaker. If there is no reset function or fuse

...computer while you short the power switch on that means probably your motherboard fail. Other option is, in order to troubleshoot the problem of your computer you must have an extra computer with the ...

power button My computer is approximately 5 yrs. old. The power button just recently stopped working. I can no longer turn the tower on by the power button. I've check all power cords and they are ...

...power to the computer (the power supply) but the motherboard isn't getting the correct power. Sometimes it can indicate a motherboard fault or that the power supply is not set to the correct ...