Canon LASER SHOT LBP-2900 Printer "check ac power error message" Questions

...AC Power Cord to set data. ok first pull all cartridges and check there are not plastic strip on copper point. then also check that all are fixed in exact position .becasue all cartrdge must have 1 ...

...AC Power) (Unplug and wait 30 sec., then plug back in) Thursday, 10 July 2008 Epson 4800 Error message - Service req. 100001C0 I was printing quite happily on my Epson 4800 one evening recently, but ...

is rotating and 0VDC when the fan is off.? Y N | Replace the Printer Engine Controller PWB 9 Replace the AC Driver PWB Please rate solution to your question "How can I check that new Fuser unit is ok?

...if the carousel moves freely. -Reconnect the AC power cable, turn on the printer, and check. If the error still occurs, please contact your printer manufacturer for further advice. ...

...check then power down your printer and remove the power cord from the back of the printer. Remove all of the ink cartridges from the printer. Wait 2 minutes, then plug the AC cord back into the ...

...for two seconds or more and release it. 7: Press and HOLD RESUME for two seconds or more and release it. 8: Unplug AC Power Cord to set data. Good luck! inset the orgnal cartridge and check ...

damage. Is the cable damaged? Replace the fuser cable. 3 Remove the fuser. Check the AC and DC autoconnects on both the fuser and the printer for damage. Are the connectors damaged? Replaced the cable

...check connecting cables with PC. Unplug printer form AC outlet for couple of minutes and replug back in and check. Remove both cartridges. Unplug printer powe cord and usb cable. Wait ten minutes and ...

...AC cord or power off your power strip). Disconnect USB PC cable from printer. 2. Press and HOLD the POWER button (untill step 7). 3. Reconnect power cord (turn on power) to the printer. 4. The ...

...check to make sure no paper or foreign objects obstructing the printer feeder If you become sure that now really there is no paper, dust or foreign objects then Turn the printer off, and disconnect ...