I have some problems with SSH, here the info that i could get from the appliance: SA-Firewall# Device ssh opened successfully. SSH0: SSH client: IP = '172.17.200.32' interface # = 2 SSH: host key ...
...140.9 any access-list IPSAllowedOutsideInterface extended permit tcp 213.226.0.0 255.255.0.0 any eq ssh access-list IPSAllowedOutsideInterface extended deny tcp any any eq 3389 access-list ...
could nt access my asa5510? If you are trying to access it remotely (via telnet or SSH), you will need to enable management on the interface that you are access it on, and it is also advisable to tie ...
Question about Cisco ASA Computers & Internet
...s log is usualy stored localy on ASA itself, so easiest way to export that log is to go with telnet/ssh/console on it, do a command : show logging and copy/paste output into a new file. but beware - ...
...Don't forget the ASA has to pre-configured, just a simple config. Have HTTPS enabled and telnet/SSH helps as well if you dont have a serial port or the console cable. Cisco's website will give
Question about Cisco ASA Computers & Internet
how do i turn on ssh for a sonicwall NSA 3500? Capture shows block code 36. I have a rule to allow ssh connections from anywhere on the outside interface. The outside and inside interfaces share an ip
======================== D-Link DFL-700 1.00.00V Copyright Clavister 1996-2003. All rights reserved SSH IPSEC Express SSHIPM version 5.1.1 library 5.1.1 Copyright 1997-2003 SSH Communications Security
Question about Cisco Computers & Internet
...protocol sqlnet 1521 names object-group service RemoteAccess tcp port-object eq 3389 port-object eq ssh access-list 101 permit ip 192.168.1.0 255.255.255.0 10.107.2.0 255.255.255.0 access-list 101 ...
...method: If it is enabled for remote management you can check the remote management port, typically SSH (TCP&UDP/22). If you've never done port level testing there are a number of ways to do
Question about Cyberguard Computers & Internet
...straight from the unit to a pc without using the url Hi, yes that device uses a protocol called SSH which is a command line based interface. from a windows machine I would recommend using "Putty" ...
57 questions posted
Usually answered in minutes!
25 Questions
15 Questions
22 Questions
1 Questions