Cisco ASA 5510 Firewall "power supply" Questions

power supply is good (powers up my spare ASA5505). Does anyone have a contact or any repair information? http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html From the US, you can call:

...when powered, but others glow well. no console port response. It seems eqipment is working but not. possible solution; 1-turn off and turn back on 2-open the cover and check the power supply and ...

...power supply from one connection to another. Can I just plug out the power connection and switch it. Will the Cisco Asa 5510 restart again. I just want to be sure before I do it. Yes. The firewall ...

...power supply. If that is the case you will not be getting any response from the device. If you are getting activity (fans spinning, LED activity) then there is a different issue. Plug a console cable ...

and will not boot up Since the fan is spinning, the power-supply is at least partially OK -- it must supply several different voltage-levels. Try a different power-supply. Or, "dead" CPU, or "bad" RAM

no power no hp color laser jet 6015 dn printer no power. ok power supply check go to there web page: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3463670

...power supply, in case a fire hits when the power is off (happens more often than you might think). This (battery back-up power) is a REQUIREMENT in California, part of the fire code. Have fun! -- ...

power supply. Hold down the Reset button on the rear side of the Edge. Connect the power supply while you continue to hold down the Reset button. Continue to hold down the button until the yellow Attn